Anti-MagLap
Spin this lap to demagnetize gravers or other small metal objects. To use, hold the object to be demagnetized close outer edge of the spinning lap and pull the object straight away while it is spinning.

 

Comes with a 1/2" hole in the center so that it can be mounted on a power hone. Or it can be mounted on a "mandrel lap adapter" (sold above) so that a drill press or electric hand drill can be used to spin the lap. Big thank you to Paolo for his contribution and help with this lap!
Forum thread about the Anti-MagLap

 Anti-MagLap $46

Metal Forming Domers

For forming metal to a dome shape.   Solid steel.  Wipe down with light oil after use to help prevent rust.  Use in press to form sheet metal. Machined for 10ga .135" sheet, however thicker or thinner will also dome.

 
Thanks to Wes Griffin for lighting a fire to make these Domers happen! 

 5 Inch Domer $136 (Within USA)

 3.5 Inch Domer $93 (Within USA)

 5 Inch Domer$136 (Outside USA)

 3.5 Inch Domer $93 (Outside USA)

Border Scribe

Border Scribe

$69.50

EngraverHand Brush Pack
for drawing program "Procreate".
Read about them more and order from engraving artist Marius Mellebye's website Link



Marius Mellebye made brushes for engravers that work in the drawing program Procreate.

Procreate Engraving Brush pack (31 brushes) for around $12.  For example: Outline/Shading brush, Outline brush with stabilizer, Gold Texture Brush, Fill Brush, Stippling Brush, Line background brush and 25 different pattern brushes and it's pretty quick to make good looking ideas or examples of designs for clients or your own work.  Order direct from the Marius Mellebye's website: Link

Practice Ring Blanks

Practice Ring Blanks
These proprietary alloy ring blanks engrave and drill clean.  No stick or gummy cutting.

Set of three with widths of 6mm, 4mm and 2mm.  Price works out to $5.78 each, but they are only sold in these three piece sets.
$17.35

Dividers

Dividers

$87.50

AirGraver® Mini Stone Holder
Thread about the holder on the engraving

The size of stones the holder is made for are:
.3mm (.012") square - full length Artco.com
.5mm (.020") square - full length  Artco.com
Available grits 180 through 1200 

AirGraver® Mini Stone Holder
(stones not included) $49.00

Photos by engraving artist Marius Mellebye with the stone holder installed in his Classic AirGraver.  Click to enlarge. 

This stone holder is for the  the Classic AirGraver® (foot control model or PalmControl model).  Use the holder in the AirGraver for finishing surfaces of sculpture carving and engraving. The AirGraver's unique action of isolated fast ultrasonic like movement works great for use with finishing stones.  Use the stones in hard to reach areas to smooth surfaces. Tip: Impacts per minute of AirGraver should be set at a 6000 to 10,000 range. Set the Classic's adjust ring toward a shorter stroke with the standard or light weight stainless pistons. 

Pin Vise

Pin Vise: Used to hold small diameter scribe.  NOTE: 1/16" diameter friction fit carbide dental burs sharpened into a point on a diamond lap or stone work great for a small strong scribe or even a Bulino dot tool. Such points are also used for scrimshaw.

$25.37

Jett Ballistic
Thermoplastic materials used for fixturing in jewelry are patented by Tyler Teague. US Patent 5,715,589
Mr. Teague has been in the forefront of improving jewelry manufacturing world wide for over 35 years.  For more about Mr. Teague and his work please visit ProtoProducts.com 

Jett Ballistic is the latest fixturing material from Tyler Teague.  It uses the strength of Kevlar (also used in bullet proof vests) along with thermoplastic.  This unique material results in a durable compound for jewelry and engraving fixturing.  For example, it can be used for holding rings while stone setting and for other hard to hold objects while engraving. 
 

Jett Ballistic 1lb.
$30.00

Engraver's Sanding Block
2.5" long x 0.5" wide.

The above knife blade was finished and lined with 2000 grit silicon carbide paper available at auto parts stores
Theads on the Engraving forum about the sanding block:
engravingforum.com/showthread.php?t=10699
engravingforum.com/showthread.php?t=10406

Engraver's Sanding Block
For securing sandpaper strips. Length of the sanding block is 2.5".  Holds sandpaper 0.5" wide x 4.75" long.

$149 (out of stock)
 

Use this sanding block to hold sandpaper and finish a surface in preparation to engraving, or for sanding gold inlays, etc...

Depending on the application and how bad the surface finish is,  you might start with  240 or 320 and work through the grits up to 1200. Change sanding directions with each change of grits and sand with that grit until all the scratches are cleaned up from the last grit. 320, 400, 600, 1200, 1500 You can take it one more step to 2000 grit for a nice line polish.  Silicon carbide paper is recommended available at auto parts stores.

Coming soon
Dual Axis Ring Holder
Available in single or dual Axis 
Clamp this in a vise and use for inside ring engraving.
Dual axis to easily tilt a ring without need of tilting the vise or re-clamping in the jaws.
Click photo to enlarge

 

Coming soon
Dual Axis Ring Holder
for inside ring engraving
Available in single or dual Axis. 
Dual Axis $
Single Axis $
 

Old 1912 patented
Ring Holder, Posted by Kevin Scott on the antique tools section of the engravingforum

Colored graver beads

Slip these over your graver to help identify
your various graver point.  (Graver in photo not included)
 

Random colored graver bands. $0.00 Free

 

Practice Brass Plate
Thick (1/4" thick) so there is
no vibration of the plate while engraving
making it ideal for a practice plate. 
2"X2" square x 1/4" thick

Brass Practice plate

$15 each

Mild Steel Practice Plates

Order custom sized practice plates.  Customs lengths and quantity. To prevent vibration while engraving use thicker plates. 1/4" to 3/8" thick plates are ideal.

2"x2"x3/8"
Order direct from OnLineMetals.com